# NTP Network Time Protocol 
# **** ATTENTION ****: *You have to restart the NTP service when you change this file to activate the changes* 
# PLEASE CHECK THIS FILE CAREFULLY AND MODIFY IT IF REQUIRED 
# Configuration File created by Windows Binary Distribution Installer Rev.: 1.27  mbg
# please check http://www.ntp.org for additional documentation and background information
# restrict access to avoid abuse of NTP for traffic amplification attacks 
# see http://news.meinberg.de/244 for details  
restrict default noquery nopeer nomodify notrap  
restrict -6 default noquery nopeer nomodify notrap  
 
# allow status queries and everything else from localhost 
restrict 127.0.0.1 
restrict -6 ::1 
 
# if you need to allow access from a remote host, you can add lines like this: 
# restrict <IP OF REMOTE HOST> 
 
# Use drift file 
driftfile "C:\Program Files (x86)\NTP\etc\ntp.drift"

# your local system clock, could be used as a backup
# (this is only useful if you need to distribute time no matter how good or bad it is)
#server 127.127.1.0
# but it should operate at a high stratum level to let the clients know and force them to
# use any other timesource they may have.
#fudge 127.127.1.0 stratum 12

# Use specific NTP servers
server msltime1.irl.cri.nz iburst minpoll 6 maxpoll 7
server msltime2.irl.cri.nz iburst minpoll 6 maxpoll 7
server s1.ntp.net.nz iburst minpoll 6 maxpoll 7
server s2.ntp.net.nz iburst minpoll 6 maxpoll 7
server s3.ntp.net.nz iburst minpoll 6 maxpoll 7
server s4.ntp.net.nz iburst minpoll 6 maxpoll 7

# End of generated ntp.conf --- Please edit this to suite your needs
